(510) 657-4000

Contact Us or Order

PixeLINK PL-D721CU S BL AF2.6

PixeLINK Camera

Product Family

PL-D Series

Part Number

PL-D721CU-S-BL-AF2.6

Camera Type

Area

Sensor Type

CMOS

Sensor Size

1/2"

Mount

S

Resolution

1-1.9 MP

Interface

USB 3.0

Color/Mono

Color

Frame Rate

150 fps

Max Frame Rate

150 fps

Salient Features

PL-D721CU S BL AF2.6, CMOS USB 3.0 Autofocus Camera

The PL-D721CU-S-BL-AF2.6 USB 3.0 board level camera provides high resolution, low noise images for outstanding value in a broad range of industrial applications.

This monochrome camera incorporates an autofocus 2.6mm S-mount lens and features a 1.3 megapixel (1280 x 1024) resolution imager capable of 150 fps at full resolution

he PL-D721CU-S-BL-AF2.6 camera based on an OnSemi Vita1300 sensor, with its USB 3.0 interface links together the benefits of high frame rate CMOS technology with the high-speed data throughput of USB 3.0 technology.

The PL-D721CU-S-BL-AF2.6 incorporates the CASPIAN M12-316-2.6 electronic, focus-controllable S-mount lens. Leveraging Varioptic electrowetting liquid lens technology, the cameras deliver fast, noiseless, controllable autofocus from 10 cm to infinity.

This monochrome camera provides low noise images for outstanding value in a broad range of industrial applications.

It features a 1.3 megapixel (1280 x 1024) resolution imager capable of 150 fps at full resolution.

The PL-D721CU models of cameras are based on an ON Semiconductor CMOS global shutter sensor with a 1/2” optical format.

The extensive built-in image processing possibilities (image pre-processing) result in outstanding image quality, less load on the system and higher performance.

This camera provides the user choice of 8-bit or 10-bit digitization and a dynamic range of 53dB and 90dB using Extended Shutter.

 

 

SpecificationsFeaturesApplicationsAccessoriesDownloadsOrder PixeLink CameraRelated Products

Specs Chart

Features 
Bit Depth8 & 10
ColorColor, Mono
ConfigurationBoard Level with Auto Focus, GPIO Case, Board Level, Standard, GPIO with Auto Focus
Sensor TypeCMOS
Frame Rate150
InterfaceUSB 3.0
Lens MountCS-Mount (BL version only), C-Mount, S-Mount Adapter
Resolution1280 x 1024 (1.3MP)
Shutter TypeGlobal
Sensor Size1/2"
Triggering OptionsManual & Software

Features

PixeLINK USB 3.0 cameras include a number of real-time image pre-processing functions. All functions mentioned below are performed by the FPGA inside the camera – with no additional CPU load – allowing the use of an inexpensive host computer.
  • Auto & manual exposure
  • Programmable LUT
  • Auto & Manual White Balance
  • Color Temperature
  • Gain
  • Gamma
  • Saturation
  • Histogram
  • Binning and Decimation
  • Image Flip & Rotate
  • Callbacks (Image Filters)

 

Applications

Typical Applications

  • Medical
  • Astrophotography
  • High performance security & surveillance applications
  • Parts inspection
  • Metrology and biometrics
  • PCB and flat panel display inspection.

Accessories

Cards and Cables

PL-USB3-3M-CABLE LOCKING

3M USB3 cable with locking screws
PL-USB3-2M-CABLE

Shielded 2M USB3 cable

Mounting Hardware

PL-D RIGHT-ANGLE 1/4-20 MOUNT

RIGHT-ANGLE 1/4-20 MOUNT
PL-D STRAIGHT 1/4-20 MOUNT

STRAIGHT 1/4-20 MOUNT

Trigger Accessories

PL-D 2M-TRCABLE-ACC PUSHBUTTON

8-pin Hirose to push button trigger accessory cable
PL-D 2M-TRCABLE-ACC UNTERMINATED

8-pin Hirose to an unterminated end

Order PixeLINK Camera

Fill out the form below for a Free Quote

Quote Request- Individual PP

Quote Request

*Required Field

General Information

Sending

 

 

 

 

Requested Products

  • Your quote request cart is empty.
Top