(510) 657-4000

Contact Us or Order

Dalsa Genie CR-GC00-C128x

Teledyne DALSA Camera

Product Family

Genie

Part Number

CR-GC00-C128x

Camera Type

Area

Sensor Type

CCD

Sensor Size

1/3"

Mount

C, CS

Resolution

1-1.9 MP

Interface

GigE Vision

Color/Mono

Color

Frame Rate

10-25 fps

Max Frame Rate

24 fps

Salient Features

Genie C1280

The Genie C1280 uses a Sony Bayer color CCD sensor with a resolution of 1280 x 960. Operating at 24 frames per second at full resolution, this Genie  takes advantage of gigabit Ethernet technology, transmitting data over standard CAT-5e and CAT-6 cables to distances of up to 100m. Like all Genie cameras, the C1280 is based on AIA (Automated Imaging Association) GigE Vision Standard to directly link the camera to a PC.

All Genie cameras are supported by Teledyne DALSA’s Sapera™ LT software libraries featuring CamExpert for simplified camera set-up and configuration. Sapera LT has been field proven in tens of thousands industrial applications. Hardware independent, Sapera LT delivers the same reliable performance regardless of the image acquisition device being used. This unique feature allows OEMs to start using the Genie without re-writing the application. In addition, Sapera LT includes powerful diagnostics and setup utilities for application development, custom camera configurations and system deployment.

Teledyne DALSA Platform Development Advantage – Free Run-Time Licensing
The Sapera Essential standard processing tool run-time license is offered at no additional charge when combined with the Teledyne DALSA frame grabbers. This software run-time license includes access to over 400 image processing functions, area-based (normalized correlation based) template matching tool, blob analysis and lens correction tool. Some conditions and limitations apply, contact Teledyne DALSA sales for details.

 

Feature HighlightsProgammabilityApplicationsRelated ProductsOrder Dalsa Genie

Feature Highlights

  • Uses standard PC and server Ethernet ports & hardware
  • Supports cable lengths up to 100 m (CAT-5e or CAT-6)
  • Simplified set-up with field proven Sapera Essential software featuring CamExpert
  • Engineered to accommodate industrial environment with a rugged, screw mount, RJ-45 connector
  • Small compact form factor
  • 32 bits, YUV or Raw Bayer
  • On-board Color Conversion
  • Higher frame rates with vertical windowing
  • Engineered with Teledyne DALSA’s Trigger-to-Image Reliability frameworkgenie_200x125
  • GigE Vision compliant
  • Options for C or CS-Mount lenses
  • Also available with Right-Angle lens mounts

Programmability

  • 28 fps, higher frame rates achievable in partial scan mode
  • Global electronic shutter with exposure controlgenie_200x125
  • Programmable LUT
  • On-board flat-field correction
  • On-board Color conversion

Applications

  • Electronics manufacturing inspectiongenie_200x125
  • Intelligent traffic systems
  • Industrial metrology

Order Dalsa Genie Cameras

Fill out the form below for a Free Quote

Quote Request- Individual PP

Quote Request

*Required Field

General Information

Sending

Requested Products

  • Your quote request cart is empty.
Top