Dalsa Genie Nano G3-GC11-C4031IF
Teledyne DALSA Camera
Product Family |
Genie Nano |
Part Number |
G3-GC11-C4031IF |
Camera Type |
Area |
Sensor Type |
CMOS |
Sensor Size |
1" |
Mount |
CS-mount with IR cut-off filter |
Resolution |
8-8.9 MP |
Interface |
GigE Vision |
Color/Mono |
Color |
Frame Rate |
25-60 fps |
Max Frame Rate |
30 fps |
Salient Features
Genie Nano Camera: G3-GC11-C4031IF, Color, CMOS, Area Scan, 30fps, CS-Mount with IR cut-off filter
The Genie Nano-C4030 uses the Sony IMX267 Monochrome sensor with a resolution of 4112 x 2176. Teledyne DALSA’s Burst Acquisition and TurboDrive feature allows for image capture rates of up to 27 fps in 8.9 MP resolution while maintaining very good image quality.
The Genie Nano-C4030 takes advantage of gigabit Ethernet technology, transmitting data over standard CAT-5e and CAT-6 cables to distances of up to 100 m. Like all Teledyne DALSA GigE cameras, the Genie Nano-M4030 is based on AIA (Automated Imaging Association) GigE Vision Standard to directly link the camera to a PC. And all Genie Nano cameras are built with Teledyne DALSA’s Trigger to Image Reliability framework, which controls and monitors the entire process from trigger through image capture and transfer to host memory and helps protect you from data loss.
Genie™ Nano-C4030 Features
- Uses standard PC Ethernet port & hardware
- Supports cable lengths up to 100 m (CAT-5e or CAT-6)
- Simplified set-up with field proven Sapera Essential software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized, screw mount, RJ-45 connector
- Frame Rate:
- Max sustained with TurboDrive: 27 fps
- Max sustained, standard: 12.7 fps
Feature | Specification |
---|---|
Part Number | G3-GC11-C4031IF |
Resolution | 4112 x 2176 |
Max. Frame Rate | 27 fps |
Pixel Size | 3.45 µm |
Output Format | GigE Vision |
Size | 21 x 29 x 44 mm |
Mass | 46 g |
Order the Genie Nano G3-GC11-C4031IF
Fill out the form below for a Free Quote!