Dalsa Genie Nano G3-GM10-M1941

Salient Features

Genie Nano Camera: G3-GM10-M1941, Monochrome, CMOS, Area Scan, 84fps, CS-Mount

The Genie Nano-M1940 uses the Sony Pregius IMX174 2.3M Monochrome sensor with a resolution of 1920 x 1200. Teledyne DALSA’s Burst Acquisition and TurboDrive feature allows for image capture rates of 84 fps in 2.3M pixels resolution while maintaining exceptional image quality.

The Genie Nano-M1940 takes advantage of gigabit Ethernet technology, transmitting data over standard CAT-5e and CAT-6 cables to distances of up to 100 m. Like all Teledyne DALSA GigE cameras, the Genie Nano-M1940 is based on AIA (Automated Imaging Association) GigE Vision Standard to directly link the camera to a PC. And all Genie Nano cameras are built with Teledyne DALSA’s Trigger to Image Reliability framework, which controls and monitors the entire process from trigger through image capture and transfer to host memory and helps protect you from data loss.

Genie™ Nano-M1940 Specifications

•  Active Resolution 1920 x 1200
• Acquisition Frame Rate 84 fps (with TurboDrive™)
• Data Output Transfer Gigabit Ethernet (1000 Mbit/s) only
• Pixel Size 5.86 μm
• Data Format 8 or 10-Bits output (User selectable)
• Exposure Control Automatic, Programmable, or via External Trigger
• Dynamic Range 71.8 dB
• Gain Control Automatic, Manual up to 48 dB
• I/O Ports 2 opto-isolated input, 2 opto-isolated output
• Image Buffer 96 MB of On-board memory
• Lens Mount C and CS-Mount available
• Size (L x H x W) 21.2 mm x 29 mm x 44 mm (without lens adapter or connectors)
• 38.9 mm x 29 mm x 44 mm (with lens adapter and connectors)
• Mass ~46g
• Operating Temp -20 to +60c (Housing temperature)
• Power Supply 10 to 36V or Power Over Ethernet (POE)
• Power Dissipation 3.6 W(12V) 4.1 W (PoE)
• Data Connector Standard or Vertical Screw mount RJ-45
• Power and I/O Connector SAMTEC TFC-105 type
• Camera Specification GigE Vision v1.2 Compliant
• Software Platform Teledyne DALSA Sapera LT 8.0 or 3rd Party Genicam Compliant SDK
• Part Number G3-GM10-M1940 (for C-mount option)

Order the Genie Nano G3-GM10-M1941

Fill out the form below for a Free Quote!