(510) 657-4000

Contact Us or Order

Dalsa Genie TS G2-GM10-T2040

Teledyne DALSA Camera

Product Family

Genie TS

Part Number


Camera Type


Sensor Type


Sensor Size





4-4.5 MP


GigE Vision



Frame Rate

25-60 fps

Max Frame Rate

37.5 fps

Salient Features

Genie TS-M2048, G2-GM10-T2040

The Genie TS-M2048 uses the CMOSIS CMV4000 monochrome CMOS sensor with a resolution of 2048 x 2048. Teledyne DALSA’s “Burst Mode” feature allows for image capture rates of 37.5 fps in 4 megapixel resolution with a true global shutter while maintaining exceptional image quality.

The Genie TS-M2048 takes advantage of gigabit Ethernet technology, transmitting data over standard CAT-5e and CAT-6 cables to distances of up to 100 m. Like all Genie cameras, the TS-M2048 is based on AIA (Automated Imaging Association) GigE Vision Standard to directly link the camera to a PC.


Feature HighlightsProgammabilitySensorAdvanced CapabilitiesData ProcessingOrder

Feature HighlightsGenie-TS-Group-B

  • Ideal for Intelligent Transportation Systems
  • Simplified set-up with field proven Sapera Essential software featuring CamExpert
  • Engineered to accommodate industrial environment with a ruggedized, screw mount, RJ-45 connector
  • Operating temperature : -20 to +60c
  • Power dissipation : ~4.5 to 5.5W

I/O Versatility

  • Networking
    • Gigabit Eithernet interface
  • Power over Ethernet (POE)
  • Auxiliary power input 12 – 24V
  • I/O
    • 4 general purpose outputs
    • 4 general purpose inputs with programmable threshold
  • Auto-Iris
    • 4-pin connector for DC or video iris
    • Motorized iris control available on the 25-pin micro-D connector
  • Motorized Lens
    • Zoom and focus control available on the 25-pin connector
  • Serial Control
    • RS-232 and RS-485 serial port output offers remote access from the PC to serial devices around the camera (like PTZ)
  • General purpose Timer and Counter
    • Generate events based on user defined timer or counter


  • Higher frame rates achievable in partial scan mode and Multi-ROI support (with up to 16 ROI)
  • Global electronic shutter with exposure Control
  • Auto-Brightness Feature
  • Extended Dynamic Range Function
  • On-board flat-field correction
  • Multi-Exposure FeatureGenie-TS-Group-B
  • Programmable LUTs
  • On-board Image compression
  • Transfer On-Demand Function
  • IEEE1588 Precise time Protocol

Sensor Features

  • 4 megapixel resolution at 37.5 fps in burst mode
  • Higher frame rates in partial scan mode
  • CMOSIS CMV4000 monochrome CMOS image sensor with true global shutter
  • High dynamic range
    • Multi-slope function
  • Binning
    • Horizontal and vertical
  • Auto-Brightness
    • Auto-exposure
    • Auto-gain (AGC)
    • Auto-iris
  • Multiple Exposure Times
    • Different exposure time per image
    • Cycling method is user-controllable
  • Multiple Gains
    • Different gain settings for for every image
    • Cycling method is user-controllable
  • Moving ROI
    • New ROI positions for every image
    • Cycling method is user-controllable
  • Cycling Feature mode
    • Cycling of feature values can change upon a software command, on every x number of frame(s) or on a external input signal

Advanced Capabilities

  • Meta Data
    • Latches current camera values with images, including timestamp, exposure, and more
  • Image-On-Demand
    • Auto mode – automatically send images to PC as acquired
    • Manual Mode – camera can store acquired images in memory and transfer when needed
  • Pre-Trigger
    • Loop buffer functionality allows acquisition of multiple images from BEFORE (and after) the actual trigger event
  • Multicasting
    • Image Multicasting – images sent out to multiple computers for parallel processing
    • Simultaneously control multiple cameras with a single software command
  • IEEE1588
    • Built-in feature for multiple camera synchronization
    • Precise time protocol – time stamping images with microsecond


Data Processing Related Features

  • Multiple Flat field Correction (FFC) with pixel correction
    • Different FFC per image
    • Cycling method is user-controllable
  • Multiple look-up tables (LUT)
    • 4 available LUTs
    • Different LUTs per image
  • Motion Detection
    • Image capture based on motion detection
  • Image Filtering
    • Smoothing /sharpness features for monochrome models
  • Image Compression
    • JPEG format, user-controlled parameters

Order Dalsa Genie TS G2-GM10-T2040

Fill out the form below for a Free Quote!

Quote Request- Individual PP

Quote Request

*Required Field

General Information


Requested Products

  • Your quote request cart is empty.