(510) 657-4000

Contact Us or Order

Dalsa Genie TS G2-GM10-T2561

Teledyne DALSA Camera

Product Family

Genie TS

Part Number


Camera Type


Sensor Type


Sensor Size







GigE Vision



Frame Rate

51 fps

Max Frame Rate

51 fps

Salient Features

Genie TS-M2560, G2-GM10-T2561

The Genie TS-M2560 uses the Anafocus Lince 5M Monochrome sensor with a resolution of 2560 x 2048. Teledyne DALSA’s “Burst Mode” feature allows for image capture rates of 51 fps in 5M pixels resolution while maintaining exceptional image quality.

The Genie TS-M2560 takes advantage of gigabit Ethernet technology, transmitting data over standard CAT-5e and CAT-6 cables to distances of up to 100 m. Like all Genie cameras, the TS-M2560 is based on AIA (Automated Imaging Association) GigE Vision Standard to directly link the camera to a PC.


Feature HighlightsProgammabilitySpecsAdvanced CapabilitiesApplicationsOrder

Feature HighlightsGenie-TS-Group-B

  • Uses Standard PC Ethernet port & hardware
  • Supports cable lengths up to 100m (CAT-5e or CAT-6)
  • Simplified set-up with field proven Sapera Essential software featuring CamExpert
  • Engineered to accommodate industrial environment with a Ruggedize, screw mount, RJ-45 connector
  • Auto-Iris (video, DC or Motorized)


  • Higher frame rates achievable in partial scan mode
  • Global electronic shutter with exposure Control
  • Auto-Brightness Feature
  • Multi-Exposure Feature
  • On-board flat-field correction
  • Multi-Exposure FeatureGenie-TS-Group-B
  • Programmable LUTs
  • On-board Image compression
  • Transfer On-Demand Function
  • IEEE1588 Precise time Protocol


  • Active Resolution  2560 x 2048
  • Acquisition Frame Rate  51 fps
  • Data Output Transfer Gigabit Ethernet, also supports 100 Mbps
    Pixel Size 5 μm
  • Data Format 8-bits
  • Exposure Control Automatic, Programmable, or via External Trigger
  • Dynamic Range 52dB
  • Gain Control Automatic, Manual
  • I/O Ports 4 opto-isolated input, 4 opto-isolated output,
    3 motorized Control, RS-485 Port, and RS-232 Port
  • Image Buffer 512MB of On-board memory
  • Lens Mount CS-MOUNT
  • Size 49 mm x 49 mm x 54 mm
  • Mass ~196 g
  • Operating Temp -20 to +60c
  • Power Supply 12 to 24V or Power Over Ethernet (POE)
  • Power Dissipation ~4.5 to 5.5W
  • Data Connector Standard or Screw mount RJ-45
  • Power and I/O Micro-D 25-pin and 4-pin auto-Iris
  • Regulatory Compliance FCC Class A, CE, RoHs 2004/105/EC
  • Camera Specification GigE Vision v1.2 Compliant
  • Software Platform Teledyne DALSA Sapera LT or 3rd Party Genicam Compliant SDK

Advanced Capabilities

  • Meta Data
    • Latches current camera values with images, including timestamp, exposure, and more
  • Image-On-Demand
    • Auto mode – automatically send images to PC as acquired
    • Manual Mode – camera can store acquired images in memory and transfer when needed
  • Pre-Trigger
    • Loop buffer functionality allows acquisition of multiple images from BEFORE (and after) the actual trigger event
  • Multicasting
    • Image Multicasting – images sent out to multiple computers for parallel processing
    • Simultaneously control multiple cameras with a single software command
  • IEEE1588
    • Built-in feature for multiple camera synchronization
    • Precise time protocol – time stamping images with microsecond



• Electronics manufacturing inspection
• Industrial metrology
• Intelligent traffic systems

Order Dalsa Genie TS G2-GM10-T2561

Fill out the form below for a Free Quote!

Quote Request- Individual PP

Quote Request

*Required Field

General Information


Requested Products

  • Your quote request cart is empty.