(510) 657-4000

Contact Us or Order

Dalsa Linea LA-GM-02K08A-00-R

Teledyne DALSA Camera

Product Family

Linea

Part Number

LA-GM-02K08A-00-R

Camera Type

Line

Sensor Type

CMOS

Sensor Size

Linear CMOS

Mount

C-mount adapter available, F-mount adapter available, M42 x 1

Resolution

2k

Interface

GigE Vision

Color/Mono

Monochrome

Frame Rate

52 kHz

Max Frame Rate

Up to 80 kHz with TurboDrive

Salient Features

Dalsa Linea Camera: Linea Mono 2k 52 kHz GigE

The new Linea™ family of line scan cameras provides the uncompromising performance and rich feature-set found in Teledyne DALSA’s high-end line scan cameras at an unprecedented price point.

Based on the most advanced CMOS line scan technology Linea employs a single line 7 µm x 7 µm pixel array at a 52 kHz line rate, achieving speeds of up to 80 kHz with TurboDrive™. With excellent sensitivity and speed, Linea surpasses the requirements of demanding applications—such as materials grading and inspection, transportation safety, and general purpose machine vision. And all Linea cameras are built with Teledyne DALSA’s Trigger to Image Reliability framework, which controls and monitors the entire process from trigger through image capture and transfer to host memory and helps protect you from data loss.

Linea is a compact, light weight and robust camera with many attractive features, including full-fledged flat-field correction, multiple ROI, smart triggers through programmable GPIO, multiple user configuration sets, and calibration coefficients for various lighting conditions. GenICam™ compliant Linea is easy to set up and integrate using a GUI, such as Teledyne DALSA’s Sapera™ camera configuration utility Camexpert, or an ASCII interface using three letter commands.

 

Linea Feature Highlights

  • High responsivity
  • Up to 80 kHz with TurboDrive™
  • Low cost and compact
  • GigE Vision interface supported by Sapera LT
  • Data transmission up to 100 meters
  • GenICam compliant, easy to set up integrate and use through user friendly Sapera Camexpert configuration GUI, or three letter commands
  • Programmable camera triggering, signalling and synchronization
  • Full-fledged smart flat field and lens shading correction
  • Multiple user coefficient sets and multiple FFC calibration sets
  • Compact, robust and light weight
  • Choices of C-mount or F-mount lens adapters
  • Wide supply voltage range from 12V to 24V
  • Multiple region of interest (ROI) and binning features

Feature Specification
Part Number LA-GM-02K08A-00-R
Resolution 2048 x 1
Max. Line Rate 52 kHz
Pixel Size 7.04 µm
Output Format GigE Vision
Size 62 x 62 x 48 mm
Mass 200 g
Responsivity 320 DN/(nJ/cm²), 12 bit, 1x gain

Linea ApplicationsWhat is TurboDrive?What is T2IR?Linea ProgrammabilityCompliance

Typical Applications

  • Automated optical inspection
  • High performance sorting systems
  • Materials grading and inspection systems
  • Web inspection
  • General purpose machine vision

TurboDrive

Break the GigE Limit

TurboDrive is a mode of operation used to push past the gigabit Ethernet speed ceiling, allowing a GigE Vision cameras to send pixel information at a rate in excess of 125 MB/s and speeding up line and frame rates beyond the nominal link capacity.

How much more speed does TurboDrive deliver? The degree of improvement is dependent on the image itself, but is often double the standard throughput.

Image Quality

TurboDrive does not affect your images—the images transmitted to system memory are exactly the same as the images read from the camera sensor, bit for bit. There is no loss of image data and no compromise.

Requirements

TurboDrive does not require any hardware or software changes to your network or application. However it is only available on select Teledyne DALSA cameras and requires Teledyne DALSA’s free Sapera LT SDK (v8.0 minimum), which includes our GigE driver.

TurboDrive FAQ PDF

Watch TurboDrive

What is T2IR

Seeing is Believing

If your machine vision system shows you something, you’d like to be able to trust it. But the reality is that a lot can go wrong in a complex imaging system. If your system is a “black box”, how can you tell if your data is complete and correct—is it “the truth, the whole truth, and nothing but the truth”? If something does go wrong, can you tell what, where, and more importantly why?

Teledyne DALSA’s Trigger-to-Image Reliability framework can give you the answers. T2IR is a combination of hardware and software features that work together at a system level to help you improve the reliability of your inspection system. It controls and monitors the entire process from trigger through image capture and transfer to host memory and helps protect you from data loss.

T2IR Benefits

  • Makes system more predictable
  • Prevents many errors before they happen
  • Lets your system manage exceptions in controlled manner
  • Provides system debugging and tracing
  • Reduces downtime
  • Improves application response time
  • Increases robustness

Situations Where T2IR Helps

  • Too many objects fall in front of the camera (over triggering)
  • Need to troubleshoot a device
  • Need to verify critical imaging events such as lost frames, lines, triggers etc.
  • Need to build verification into applications as part of runtime operation
  • Want applications to be portable across devices and platforms
  • Want to tag images for traceability
  • In overload conditions, want to skip some inspections but keep track of what was skipped

Progammability

  • Multiple Regions of Interest for calibration and data reduction
  • 8 or 12 bit output, selectable
  • Smart flat field and lens shading correction
  • 4 programmable coefficient sets
  • Configurable GPIO ports, timers and counters

Regulatory Compliance

  • CE
  • FCC
  • RoHS

Order the Linea LA-GM-02K08A-00-R

Fill out the form below for a Free Quote!

Quote Request- Individual PP

Quote Request

*Required Field

General Information

Sending

 

Requested Products

  • Your quote request cart is empty.
Top