(510) 657-4000

Contact Us or Order

JAI C Series CM-140MCL-UV

JAI Camera

Product Family

C Series

Part Number


Camera Type


Sensor Type


Sensor Size





1-1.9 MP


Camera Link



Frame Rate

10-25 fps

Max Frame Rate

16 fps

Salient Features

CM-140MCL-UV:  C Series,  Camera Link, 1392 x 1040, CCD, 16 fps


The CM-140PMCL-UV is a monochrome area scan camera equipped with a special UV-sensitive CCD. It provides 1.4-megapixel resolution at 16 frames per second, with 8-bit or 10-bit output. Features like ROI readout and a sequencer function make it a versatile performer for a wide range of applications requiring sensitivity below 400 nm.


Notice : E.O.L = Product will be discontinued. Last order is Sept. 1, 2019

Excellent UV sensitivity

Equipped with the Sony ICX407BLA CCD imager, the CM-140PMCL-UV is able to extend its sensitivity to below 200 nm, allowing visualization of smaller features than those which can be seen using visible light.

Quartz glass protection

Traditional CCD cover glass blocks UV imaging, but glassless imagers can be easily dirtied or damaged. The CM-140PMCL-UV’s imager is protected by a quartz glass cover which protects the sensor’s surface while allowing UV rays to pass.

Compact and versatile

Like other C Series cameras, the CM-140PMCL-UV features a low profile design with top and bottom mounting holes, enabling them to fit easily into many types of machine vision systems. A Power over Camera Link interface with Mini-size connector offers ultra low latency and high performance.


CM-140MCL-UV Features

  • C Series
  • 1.4-megapixel monochrome CCD camera with enhanced UV sensitivity
  • 1/2” progressive scan – Monochrome
  • 1392 (h) x 1040 (v) 4.65 μm square pixels
  • 16 frames/second with full resolution in continuous operation
  • 4.65-micron pixels offer excellent image quality
  • GigE Vision interface with 10 or 8-bit output
  • Sequencer trigger mode for on-the-fly change of gain, exposure and ROI
  • Vertical binning and ROI readout provide increased sensitivity and speed
  • Exposure time from 31 μs to 2 sec. using Pulse Width trigger mode
  • Sequencer trigger mode for on-the-fly change of gain, exposure and ROI
  • Auto iris lens video output allows a wider range of light
  • Programmable GPIO with opto-isolated inputs and outputsƒƒƒƒƒƒƒƒƒ
  • Programmable exposure from 61.2 μs to 32.2 ms


  CM-140MCL-UV Application


Semiconductors – Semiconductors UV cameras let inspection systmes utilize extremely short light wavelengths so the smallest defects or surgacec featreus can be imaged and analyed

Pharmaceuticals – Vision systems for track and trace, pill sorting, inspecting vials and ampouls, and many other appications, often need to be able to”see” invisible product codes, lot numbers, or other markings.

Security Printing Inspection – Bank notes, passports, lottery tickets, and other similar items may use special security marking only visible in the UV spectrum

Electronics and Corona Inspection – Solar panels and other types of electronics may need UV imaging to look for signs of current leakage or other defects. UV cameras are also used to inspect power lines and transformers where non-visible “coronas” can indicate electrical problems.

Medical/ Dermatology – UV lighting and imaging can detect damaged skin and subsurface issue at early stages before they become serious


Order JAI C Series CM-140MCL-UV Camera

Fill out the form below for a Free Quote!

Quote Request- Individual PP

Quote Request

*Required Field

General Information



Requested Products

  • Your quote request cart is empty.