JAI GO-5100MP-USB

Salient Features

GO-5100MP-USB:  GO Series, Monochrome, 5.1 MP Polarization camera, USB3 Vision, 2464 x 2056, 2/3″ CMOS, 74 fps

The GO-5100MP-USB is a compact industrial polarization area scan camera built around Sony’s IMX250MZR polarized CMOS sensor. It features 5.1 MP resolution, a frame rate of 74 fps and an innovative 4-way polarizing wire-grid design creating a range of new imaging possibilities in industrial machine vision, traffic imaging and surveillance.

 

SB Features

• 5.1-megapixel camera featuring Sony IMX250MZR CMOS polarized sensor.
• Four different polarizing nano wire grids (0°, 45°, 90°, 135°) applied to each 4-pixel block.
• Outputs raw 5.1 megapixel mosaic image or decimated images from each polarizing angle.
• Built-in functions to calculate polarization angle, ratio, and appearance with diffuse light removed.
• Additional functions display diffuse light only (without polarization) and average for each pixel.
• Advanced algorithms provide pseudo-color overlay over monochrome and over gray images for easier analysis.
• 8, 10, or 12-bit monochrome output.
• Compact size and smart design.
• USB3 Vision interface for plug-and-play convenience.
• Single and Multi-ROI modes for flexible windowing and use of smaller optics.
• Industrial grade performance with 80G shock, 10G vibration, and over 175,000 hrs. MTBF ratings.
• mount)
• 8/10-bit output in choice of monochrome or raw Bayer color models (12-bit output available in video process bypass mode)
• Exposure control from 7 µs to 8 seconds in 1 µs steps
• 2X binning for increased speed and sensitivity (monochrome only)
• Single and multi-ROI modes for flexible windowing and use of smaller optics
• Automatic Level Control (ALC) for dynamic lighting conditions
• Accepts power over USB3 Vision interface or separate 6-pin connector
• High reliability: MTBF > 200,000 hours
• C-mount lens mount

 

 

 

Order JAI GO-5100MP-USB Camera

Fill out the form below for a Free Quote!