Kaya Iron CXP 2020E Camera

KAYA Instruments Camera

Add to Quote

Product Family	Iron 2020E
Part Number	Iron 2020E CXP
Camera Type	Area
Sensor Type	CMOS
Sensor Size	13.3 x 13.3
Mount	C, CS, DC auto iris, EF
Resolution	4 MP
Interface	Micro-BNC
Color/Mono	Monochrome
Frame Rate	See Chart
Max Frame Rate

Salient Features

IronSmall Form Factor Ruggedized Camera, CXP Model

Iron 2020E is a 4MP Small Form Factor CoaXPress up to 220 fps ruggedized camera.

Innovative Approach – The Iron 2020E is a high speed, low-cost, low-power global/rolling shutter CMOS camera with up to 12.5 Gbps CoaXPress 2.0 interface (Micro-BNC connector) which supports 4 MP high quality video at rates of up to 220fps

Intelligent Design – Our camera incorporates Gpixel’s GSENSE2020e global/rolling shutter sensor with a 6.5µm pixel size. With a compact outline the camera can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.

FeaturesSpecificationsDownload PDFAccessoriesApplicationsOrder Iron 2020E

Iron 2020E Key Feature

4 Megapixel up to 220 fps
Up to 4W power at full rate
Full image processing feature set
Pan/Tilt alignment of the sensor
Up to 12.5 Gbps CoaXPress interface
C / CS / EF or DC Auto Iris mounts
Full EMVA1288 report
Full built-in self-test (BIT)
Full built-in voltage testing
Customization as per user requirements

Specifications

Pixel Size	6.5 µm x 6.5 µm
Resolution	2048 (H) x 2048 (V)
Sensor Size	13.3 mm x 13.3 mm \| 1.2”
Sensor	Gpixel GSENSE2020e
Video output	CoaXPress 2.0 up to 12.5 Gbps (CXP3, CXP6, CXP12)
Interface Connector	Micro-BNC
Digitization	10 bit, 12 bit
Electronic shutter	Rolling / Global shutter
Shutter speed	Global: 2.54 µs @12-bit resolution
	Rolling: 18.4 µs @12-bit resolution
Exposure control	Off / Internal / Auto
Image acquisition	Continuous / Triggered
Trigger input	External, pulse generator, SW
Trigger mode	Free run, externally or internally triggered
Trigger options	Edge, de-bounce
Output resolution	16bits HDR in API or 24bit RAW (2x 10 or 12 bit ADC)
Frame rate	Global: 94 fps in HDR
	Global: 220 fps @10 bit
	Rolling: 47 fps in HDR
	Rolling: 94 fps @12 bit
Subsampling	1 x 2 / 2 x 1 / 2 x 2 (user configurable)
Monochrome/color	Monochrome
Full well charge	Global HDR: 17.1 ke-
	Rolling HDR: 40 ke-
Dynamic range	Global HDR: 63dB
	Rolling HDR: 78dB
Dark current	17 e- pxl/sec @ 21 °C
Quantum efficiency (QE) X FF	<72% @595 nm (according to sensor performance)
Temporal noise	Global HDR: 7.2 e- @25C
	Rolling HDR: 2.6 e- @25C
Latency	< 100 µs (on top of exposure time)
Communication latency	Gen<i>Cam – ~5 ms
	Direct camera access – ~0.5 ms
Regulation	FCC Part 15 Class A, CE, RoHs2 (official certification optional)
On camera processing	Defect pixel correction
	Digital binning (2 x 2)
	ROI
	Auto Exposure/Gain
	LUT
	Gain (Analog / Digital) – manual / auto
	Auto/Manual black level
Pulse generator	Yes, Programmable at 8 ns increments
Additional features	Over/under voltage protection
	Three points of temperature sensing
	Per frame ROI change
	Per-pixel FPN (optional)
	Multi ROI Support (vertical only. Horizontal at full resolution)
	Reverse voltage polarity protection
	Frame-by-frame shutter speed change
	Global reset
GPIO connection	Two inputs, two outputs, external trigger & strobe controller

Mechanical & Electrical

Dimensions (including lens mount)	44 mm x 44 mm x 51.8 mm (Height x Width x Depth)
Lens Mount	C-mount, CS-mount, EF-mount or DC Auto Iris lenses
Weight (without lens)	<100g
Typical current	170mA @ 24V
Power Consumption	<4W @ 24V DC
Mount	Front mount
Heat dissipation	Front heat dissipation
Sensor Mechanical Positioning	≤ 0.15°
Operating temperature	-40°C to 85°C, 10-90% humidity (non-condensing)
Storage temperature	-40°C to 90°C, 10-90% humidity (non-condensing)
Shock/Vibration	MIL 810F