(510) 657-4000

Contact Us or Order

Kaya Iron 255 CLHS camera

KAYA Instruments Camera

Product Family

iron 255

Part Number

iron 255 CLHS

Camera Type

Area

Sensor Type

CMOS

Sensor Size

16.1 mm

Mount

C, CS

Resolution

8-8.9 MP

Interface

CLHS, Fiber

Color/Mono

Color, Monochrome

Frame Rate

62-87 fps

Max Frame Rate

NA

Salient Features

Iron Small Form Factor Ruggedized Camera, CLHS Model

Iron 255  is an industrial grade small Form Factor CLHS/10 GiGE ruggedized camera

Innovative Approach – Iron CLHS 255 is a compact low-cost, low-power global shutter CMOS camera with a CLHS interface which supports 8.85 MP high quality video at rates up to 87.6 fps.

Intelligent Design – This Iron camera incorporates Sony Pregius IMX255 global shutter sensor with 3.45µm pixel size. With a compact outline and low power design this camera can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.

 

 

FeaturesSpecificationsDownload PDFAccessoriesApplicationsOrder Iron 255

Iron 255 Kay Key Feature

    • 8.85 Megapixel up to 87.6 fps
    • Monochrome and Color models
    • Up to 4.5W power at full rate
    • Full image processing feature set
    • Optional Pan/Tilt alignment of the sensor
    • 10 Gbps CLHS (X-Protocol) interface*
    • C mount / CS mount
    • Full EMVA1288 report
    • Full built-in self-test (BIT)
    • Full built-in voltage testing
    • Customization as per user requirements

     

    * 10GiGE Vision available upon request.

Specifications

Pixel Size 3.45 µm x 3.45 µm
Resolution 4112 (H) x 2160 (V)
Sensor Size 16.0 mm diagonal
Sensor Sony Pregius IMX255 CMOS sensor
Output Interface Fiber 10Gbps: CLHS (X-protocol). 10GiGE Vision is available upon request.
Interface Connector Fiber optic SFP+ module (single mode 1310nm)
Output Resolution 8, 10 or 12 bit
Max Frame Rate 87.6 fps @8   bit resolution
87.6 fps @10 bit resolution
62.5 fps @12 bit resolution
Image Acquisition Continuous / Triggered
Camera Control Gen<i>Cam
Electronic Shutter Global shutter
Sensor Positioning Full pan/tilt calibration for optical axes (optional)
Monochrome / Color Monochrome / Color
Temporal Noise < 2.2 e- @25°C
Full Well Charge 9828 e-
Dynamic Range > 70.8dB @520nm
Signal-to-Noise Ratio (SNR max) 40 dB @520nm
Quantum Efficiency (QE) X FF  > 63% @525nm
Shortest Exposure 10 µs
On Camera Processing Defect pixel correction
Auto/Manual White balance
ROI
Image flip
Frame counter
LUT
Flat field / Fixed patter noise correction
Gain (Analog / Digital)
Auto/Manual black level
Binning
Auto Exposure/Gain
Operational Time Counter
GPIO Connection Two inputs, two outputs, external trigger & strobe controller


Mechanical & Electrical

Dimensions (including lens mount) 45.8 mm x 45.8 mm x 86.8 mm (Height x Width x Depth)
Lens Mount C-mount, CS-mount, EF-mount or DC Auto Iris lenses
Weight (without lens) <180g
Power Input 12V (optional 5 – 36V)
Power Consumption <4.5W @ 12V DC
Operating Temperature CLHS: -40°C to 80°C, 20-85% humidity (non-condensing)
10GiGE: -40°C to 70°C, 20-85% humidity (non-condensing)
Storage Temperature CLHS: -40°C to 85°C, 10-90% humidity (non-condensing)
10GiGE: -40°C to 75°C, 10-90% humidity (non-condensing)
Ingress Protection Optional IP67 (with protective lens tube)
Operational Shock Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G
Operational Vibration Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20

 

* KAYA Instruments reserves the right to update the data sheet from time to time without prior notice

iron 255 QE table

  • Perimeter Vision
  • Military / Defense Systems
  • Low Light Surveillance
  • Special effects
  • VR

kaya_instruments_iron_640x480

Order Iron 255 CLHS

Fill out the form below for a Free Quote!

Quote Request- Individual PP

Quote Request

*Required Field

General Information

Sending

Requested Products

  • Your quote request cart is empty.
Top