(510) 657-4000

Contact Us or Order

Kaya Iron SDI 265 Camera

KAYA Instruments Camera

Product Family

Iron 265

Part Number

Iron SDI 265

Camera Type


Sensor Type


Sensor Size


C, CS, DC auto iris, EF






Color, Monochrome

Frame Rate

60 fps

Max Frame Rate

60 fps

Salient Features

IronSmall Form Factor Ruggedized Camera, SDI Model

Iron SDI 265 camera is a  Small Form Factor SDI (up to 3G-SDI) ruggedized camera


Innovative Approach – The Iron SDI 265 is a low-cost, low-power global shutter CMOS camera with an SDI interface which supports up to 3G-SDI, enabling 2k video at rates of up to 60fps.

Intelligent Design – This Iron camera incorporates Pregius’s IMX265 global shutter sensor with a 3.45µm pixel size. With a compact outline and low-key design, the Iron can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.


FeaturesSpecificationsDownload PDFAccessoriesApplicationsOrder Iron 265

Iron SDI 265 Key Feature

  • Maximal frame rate of 60 fps
  • Monochrome and Color models
  • Up to 3.2W power at full rate
  • Full image processing feature set
  • Optional Pan/Tilt alignment of the sensor
  • Up to 3G-SDI interface
  • C mount / CS mount
  • Full EMVA1288 report
  • Full built-in self-test (BIT)
  • Full built-in voltage testing
  • Customization as per user requirements


Pixel Size 3.45 µm
Sensor Pregius IMX265 CMOS Sensor
Video Output 2k, 1080p, 1080i up to 60 fps
Output Interface Single-Link HD-SDI or 3D-SDI
Output Format 10-bit 4:2:2(Y’Cb’Cr’) / 4:4:4 (RGB) / RAW (Bayer)
Interface Connector Micro-BNC
Sensor Positioning Full pan/tilt calibration for optical axes (optional)
Electronic Shutter Global shutter
Monochrome / Color Monochrome / Color
Temporal Noise < 2.2 e- @25°C
Full Well Charge 9828 e-
Dynamic Range > 70.8dB @520nm
Signal-to-Noise Ratio (SNR max) 40 dB @520nm
Quantum Efficiency (QE) X FF  > 63% @525nm
Shortest Exposure 10 µs
Exposure Control Automatic Exposure/Gain, manual Exposure/Gain
Color Control Auto/Manual White balance
RGB offsets, saturation control
Color correction matrix
Image Enhancement Defect pixel correction
Operational Time Counter
Auto/Manual black level
Flat field / Fixed patter noise correction
Image flip
Camera Configuration RS232 direct ASCII protocol
Synchronization Tri-level sync input

Mechanical & Electrical

Dimensions (including lens mount) 44 mm x 44 mm x 38.7 mm (Height x Width x Depth)
Lens Mount C-mount, CS-mount, Active EF-mount or DC Auto Iris lenses
Weight (without lens) ~50g
Power Input PoCXP full support (7-28V with external power option)
Power Consumption <3.2W @ 12V DC
Operating Temperature -40°C to 80°C, 20-85% humidity (non-condensing)
Storage Temperature -40°C to 85°C, 10-90% humidity (non-condensing)
Ingress Protection Optional IP67 (with protective lens tube)
Operational Shock Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G
Operational Vibration Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20


* KAYA Instruments reserves the right to update the data sheet from time to time without prior notice.



  • Perimeter Vision
  • Military / Defense Systems
  • Low Light Surveillance
  • Special effects
  • VR


Order Iron SDI 265

Fill out the form below for a Free Quote!

Quote Request- Individual PP

Quote Request

*Required Field

General Information


Requested Products

  • Your quote request cart is empty.