(510) 657-4000

Contact Us or Order

CON 1G E*

Matrox Frame Grabber

Product Family

Concord, Morphis

PC Slot/Bus

PCIe x1

Interface

GigE

Salient Features

CON 1G E*  Single-port PCIe x1 Gigabit Ethernet network interface card (NIC) pre-licensed for MIL interface package (GigE Vision® driver).  Acts as a fingerprint for and handles storage of supplemental MIL license(s).

Matrox Concord is a family of Gigabit Ethernet network interface cards (NICs) and IEEE 1394b adaptors that are pre-licensed for use with the Matrox Imaging Library (MIL) drivers for the GigE Vision® and IEEE 1394 IIDC protocols. The Matrox Concord family offers a long and stable life cycle, which eliminates the burden associated with sourcing and qualifying consumer-grade boards.

The Matrox Concord G-series are Gigabit Ethernet NICs that provide optimum support for the GigE Vision® camera interface standard. By way of MIL, these NICs are optimally configured to minimize GigE Vision® protocol loading on the host through the default enabling of jumbo packets as well as optimal settings for the interrupt throttling rate and number of receive buffers. Unlike generic NICs, using the Matrox  Concord G-series with MIL does not require manually adjusting advanced driver properties.Auto medium-dependent interface crossover (MDIX) further simplifies setup by automatically detecting and crossing over signals for peer-to-peer connections there by eliminating the need for special cables.

The Matrox Concord F-series are IEEE 1394b adaptors that, through MIL, enable the
use of leading IEEE 1394 industrial cameras implementing the standard IIDC protocol.
These adaptors, by way of MIL, support up to the S400 and S8003 modes of IEEE 1394aand 1394b respectively, ensuring maximum camera performance and minimal transfer latency. In addition, the use of bilingual copper connectivity permits for cost-effective cabling.

 

FeaturesFlow ChartRelated ProductsOrder

Features

  • PCIe® x1 or conventional 32-bit PCI low-profile card
  • lifecycle managed and long term availability
  • GigE Vision or IIDC support through Matrox Imaging Library (MIL)
  • pre-licensed for use with MIL GigE Vision or IIDC drivers
  • pre-configured for optimal GigE Vision performance (G-series)
  • fingerprint for, and storage of, supplemental MIL run-time license(s)1
  • programmed using Matrox Imaging Library (MIL) sold separately
  • supports 32-bit Windows® XP, 32/64-bit Windows 7/8 , and 10 and 32/64-bit Linux®2 through MIL

Flow Chart

Matrox Concord Flow Chart

Enlarge

Related Products

 

Cameras MIL Software

Order CON 1G E*

Fill out the form below for a Free Quote!

Quote Request- Individual PP

Quote Request

*Required Field

General Information

Sending

Requested Products

  • Your quote request cart is empty.
Top