EPIX PIXCI® EB1mini
EPIX Frame Grabber
Product Family |
PIXCI® EB1mini |
PC Slot/Bus |
Mini-PCIe |
Interface |
Camera Link |
Salient Features
PIXCI® EB1mini Base Camera Link Frame Grabber, PCI Express Mini Card
The PIXCI® EB1mini series of camera link frame grabbers use internal PCI Express Mini Card slots in small computer systems. Space constraints typically require routing of cables to a side of the case or to a nearby camera. Flexible cables are used to facilitate routing. The four versions of the PIXCI® EB1mini series provide multiple solutions for locating connectors.
PIXCI® EB1mini Series Features
- Base Configuration Camera Link
- MDR or SDR connector options
- Line Scan or Area Scan Cameras
- Supports more than 1000 different camera models
- Camera frame rate sequence capture
- Triggered image sequence capture
- Camera Integration & Async Reset Control
- LVTTL Trigger In and Strobe Out
- 50.95 mm long by 30.00 mm wide (2.006 in. by 1.181 in.)
Specifications
| Performance (Supports the camera’s maximum): | Horizontal Resolution
Vertical Resolution Frame Rate Bit Depth |
| Signal Input & Output: | EIA RS-644 (LVDS) Drivers & Receivers
Pixel clock frequencies from 25 to 85 megahertz |
| Data Transfers: | Supports cameras with data output rates up to 250 megabytes per second
Burst data rates to Mini PCIe bus at 2.5 gigabits per second 64 bit memory addressing |
| Bus Requirement: | PCI Express Mini Card slot |
| Connectors: | One 26 pin 3M SDR camera link connector for base camera
10 pin header for Trigger, Frame Enable, Strobe, and General Purpose I/O |
| Power Requirements: | 3.3 volts at 150 milliamps
1.5 volts at 200 milliamps |
| Certifications: | CE Compliant
ROHS Compliant |
| EPIX Software Support: | Supported by XCAP-Lite (no charge with board purchase), XCAP-Ltd, XCAP-Std, XCLIB, and XCLIBIPL.
Compatible with 32-bit & 64-bit Windows 10, 8, 7, Vista, XP, 2000, LINUX, and 32-bit DOS. Also TWAIN and Image-Pro Compatible. |
PIXCI® EB1mini Versions
| Part Number | Description |
| PIXCI-EB1MINI-H
|
The PIXCI® EB1miniH has an SDR Camera Link connector and FPGA on a separate circuit board for mounting to the side of a small chassis. Two very flexible cables connect to a half length Mini card for the PCI express connection. This allows for more mounting options in space constrained embedded systems that have half length mini PCIe slots or full length slots that have a half length mounting standoff. At the maximum Camera Link clock rate of 85 MHz, cables up to 10 meters long can be used. Dimensions: PIXCI® EB1miniH PCI Express Half Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 30 centimeter cable |
| PIXCI-EB1MINI-G-M
|
The PIXCI® EB1miniG has the Camera Link connector on a separate circuit board and connects to the FPGA circuit board with two very flexible cables. This version requires less space on the panel for more mounting options in space constrained embedded systems with a full size mini card PCIe slot. It is available with an MDR or SDR Camera Link connector, and is shown here with an SDR. At the maximum Camera Link clock rate of 85 MHz, a maximum length of 7 meters can be used. Dimensions: PIXCI® EB1miniG-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 30 centimeter cable |
| PIXCI-EB1MINI-G-S
|
The PIXCI® EB1miniG has the Camera Link connector on a separate circuit board and connects to the FPGA circuit board with two very flexible cables. This version requires less space on the panel for more mounting options in space constrained embedded systems with a full size mini card PCIe slot. It is available with an MDR or SDR Camera Link connector, and is shown here with an SDR. At the maximum Camera Link clock rate of 85 MHz, a maximum length of 7 meters can be used. Dimensions: PIXCI® EB1miniG-S PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 30 centimeter cable |
| PIXCI-EB1MINI-F-M
|
The PIXCI® EB1miniF moves the Camera Link connector to a separate board and connects the two with detachable flat ribbon cable. This allows for more mounting options in space constrained embedded systems with a full size mini card PCIe slot. Available with an MDR or SDR Camera Link connector, shown here with MDR. At the maximum Camera Link clock rate of 85 MHz, cable with maximum length of 7 meters can be used. Dimensions: PIXCI® EB1miniF-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 20.32 centimeter cable |
| PIXCI-EB1MINI-F-S
|
The PIXCI® EB1miniF moves the Camera Link connector to a separate board and connects the two with detachable flat ribbon cable. This allows for more mounting options in space constrained embedded systems with a full size mini card PCIe slot. Available with an MDR or SDR Camera Link connector, shown here with MDR. At the maximum Camera Link clock rate of 85 MHz, cable with maximum length of 7 meters can be used. Dimensions: PIXCI® EB1miniF-S PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 20.32 centimeter cable |
| PIXCI-EB1MINI
|
The PIXCI® EB1mini frame grabber provides a vertical Camera Link SDR connector with FPGA on a single printed circuit board using a full size mini card slot. At the maximum Camera Link clock rate of 85 MHz, cables up to 10 meters long can be used. Dimensions: PIXCI® EB1mini PCI Express Mini Card Frame Grabber for Base Camera Link® |
PIXCI® EB1mini Series Applications
- Airborne
- Automotive
- Industrial
- Mobile
- Rugged
- Underwater
PIXCI® EB1mini Series Interface
- PCI Express Mini Card
- Full and Half Length versions
- 64-bit memory addressing
- Burst transfer at 250 megabytes per second
- 200 megabyte per second sustained data transfer
PIXCI® EB1mini Series Software
- XCAP-Lite image capture, display, and save program included
- Capture video to computer memory with XCAP-LTD
- Stream video to disk with XCAP-STD
- XCLIB programmer libraries for frame grabber and camera control
- PXIPL image processing, measurement, and analysis libraries
- 3rd Party software available
- Windows & Linux, 32 & 64–bit
Order EPIX PIXCI® EB1mini
Fill out the form below for a Free Quote
| Part Number | Description |
| PIXCI-EB1MINI | PIXCI® EB1mini PCI Express Mini Card Frame Grabber for Base Camera Link® |
| PIXCI-EB1MINI-F-M | PIXCI® EB1miniF-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 20.32 centimeter cabl |
| PIXCI-EB1MINI-F-S | PIXCI® EB1miniF-S PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 20.32 centimeter cable |
| PIXCI-EB1MINI-G-M | PIXCI® EB1miniG-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 30 centimeter cable |
| PIXCI-EB1MINI-G-S | PIXCI® EB1miniG-S PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 30 centimeter cable |
| PIXCI-EB1MINI-H | PIXCI® EB1miniH PCI Express Half Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 30 centimeter cable |
