EPIX PIXCI EL1DB
EPIX Frame Grabber
Product Family |
Camera Link for PCI Express |
PC Slot/Bus |
PCIe x4 |
Interface |
Camera Link |
Salient Features
PIXCI® EL1DB, EPIX Dual Base Camera Link Frame Grabber In One PCI Express x1 Expansion Slot
Supports One or Two Base Configuration Camera Link Cameras, PCI Express x1 Bus
The PIXCI® EL1DB frame grabber provides two interfaces for any two Base camera link cameras. The PIXCI EL1DB is handled by EPIX’ software as if two PIXCI EL1 boards are installed. The EL1DB will accept two trigger signals one for each camera; or allows a single trigger to control capture from both cameras.
A strobe output signal is generated for each trigger. The PIXCI EL1DB frame grabber supports two cameras with a combined sustained bandwidth up to 204 MB/second. Compatible with the PCI Express x1 bus, the PIXCI EL1DB frame grabber interfaces to more than 100 of the newest, most advanced, highest bandwidth machine vision cameras available.
Plug and Play
The PIXCI EL1DB is a plug-n-play frame grabber requiring no hardware setup or adjustment. Load the software, install the board, connect the cameras, and begin to capture images.
The PIXCI EL1DB and XCAP offers:
- 250 MB/sec burst data transfer rate.
- Up to 204 MB/sec sustained data transfer from cameras to x1 PCI Express bus.
- Two Camera Control Dialogs – independent or shared exposure, bit depth, gain, frame rate, etc.
- Cameras in free-run mode for maximum frame rate sequence capture.
- Cameras in control mode for triggered image capture.
Specifications
- Supports One or Two Base Configuration Camera Link Cameras
- PCI Express x1 Bus
- 250 MB/sec Burst Data Transfers
- 204 MB/sec Sustained Data Transfer
- Line Scan or Area Scan
- Camera Frame Rate Sequence Capture
- Triggered Image Sequence Capture
- 64-Bit Memory Addressing
- Camera Integration & Async Reset Control
- Integration From Microseconds to Minutes
- Images Stored in Motherboard Memory or RAID Array
- Windows & Linux, 32 & 64–bit
- RoHS Compliant Boards Available
