Advanced Illumination Lighting
Product Family |
IC |
Lighting Type |
Controller |
Color |
NA |
Size Inside |
Other |
Size Outside |
Other |
IC: Incline Controller
The IC Inline Controller (ICS 2.0) provides steady and optimal current to lights from a small package when larger, more versatile discrete controllers are not necessary.
Provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming. 30 uSec response time.
FULL DESCRIPTION
The IC provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming.
All ICS models employ reverse input polarity protection.
A wash down version is provided with any light to which it is attached is also wash down.
0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.
| Controller Style | Inline Control System (Cable Inline, Permanently Affixed) |
| Operating Modes | Gated Continuous, Continuous |
| Input Connection | Flying Tinned Leads or Optional A-coded 5-pin Male M12 Connector |
| Input Supply Requirements | 24V DC Nominal, 1.25A Recommended 21V Min – 30V Max; Power Inputs Reverse-Polarity Protected |
| Output Channels | 1 Inline Channel |
| Output Power | Continuous: 25W Max* |
| Output Current | Continuous: 1.25A Max* |
| Output Voltage | Vin – 1V |
| Gate Control | 2.5V Min, 30V Max, <=5mA |
| Gate Protection | Protected up to 30V |
| Gate Delay | 20μs + 10μs LED rise-time |
| Gate Frequency Limit | 2KHz |
| Analog Dimming | 0V – 10V (0% – 100%); <=5mA |
| Operating Temperature Range | 0°C to +40°C |
| Storage Temperature Range | -25°C to +85°C |
| IP Rating | Non-sealed: Not Rated Sealed: IP67 |
| Dimensions | Non-sealed: 3.73″ x 0.82″ DIA (94.6mm x 20.6mm DIA) Sealed: 5.06″ x 0.82 DIA (128.7mm x 20.6mm DIA) |
| Weight | Approx. 0.106lb (48g) |
| Mounting | N/A (In-line) |
| Case Material | Polycarbonate |
| Warranty | 5 Years |
| Compliance | CE, RoHS |
| *Values shown are based on controller component limitations. Actual limitations will vary depending on the limits set for the connected light head. These limits are hardcoded into each in-line controller to prevent LED failure from occurring when driven beyond the light’s acceptable range. |
