(510) 657-4000

Contact Us or Order

Matrox Rapixo CL Pro

Published: August 17, 2020

matrox_rapixo_cl_pro_pics

This is the newest edition to the Matrox Rapixo Series, supporting the highest performance of 2.1 cameras on the market.

Matrox Rapixo CL Pro. Built upon the field-proven design of the Matrox Radient eV series of Camera Link frame grabbers, the Matrox Rapixo CL Pro offers reliable image acquisition, extended cable length support, high frame-rate image capture, and onboard image processing offload that will extend the effectiveness of the Camera Link standard for years to come.

Matrox Rapixo CL Pro at a glance

  • Support the most high-performance Camera Link cameras with available support for Full and 80-bit mode at up to 85 MHz
  • Perform deterministic image acquisition by way of the jitter-free Camera Link 2.1 interface
  • Offload host computer of custom image processing using a field-programmable gate array (FPGA) device
  • Eliminate missed frames through a PCIe® 2.0 x8 host interface and ample onboard buffering
  • Optimize multi-camera applications via support for up to four Base or two Full/80-bit Camera Link cameras per board
  • Minimize space requirements and maximize PC compatibility through a half-length design with mini Camera Link connectivity for true single-slot operation
  • Improve and simplify system connectivity with Power-over-Camera-Link (PoCL) support at extended cable lengths
  • Maintain flexibility and choice by way of 32-/64-bit Windows® 7/10 and 64-bit Linux® support

 

Order Information

Part Number

Description

RAP 4G CL DB P325 Matrox Rapixo CL Pro dual-Base Camera Link PCIe 2.0 x8 frame grabber with 4 GB DDR3 SDRAM, Xilinx Kintex 7 325T FPGA, and HDR26 (mini Camera Link) connectors. Includes cable adaptor for third and fourth GPIOs.

 

RAP 4G SF P325 Matrox Rapixo CL Pro single-Medium/Full Camera Link PCIe 2.0 x8 frame grabber with 4 GB DDR3 SDRAM, Xilinx Kintex 7 325T FPGA, and HDR26 (mini Camera Link) connectors. Includes cable adaptor for third and fourth GPIOs.

 

RAP 4G QB P325 Matrox Rapixo CL Pro quad-Base Camera Link PCIe 2.0 x8 frame grabber with 4 GB DDR3 SDRAM, Xilinx Kintex 7 325T FPGA, and HDR26 (mini Camera Link) connectors. Includes cable adaptor for third and fourth GPIOs.

 

RAP 4G DF P325 Matrox Rapixo CL Pro dual-Medium/Full Camera Link PCIe 2.0 x8 frame grabber with 4 GB DDR3 SDRAM, Xilinx Kintex 7 325T FPGA, and HDR26 (mini Camera Link) connectors. Includes cable adaptor for third and fourth GPIOs.

 

Datasheet PDF

Requested Products

  • Your quote request cart is empty.
Top