(510) 657-4000

Contact Us or Order

Schneider Neutral Density (ND) Filters

ND filters reduce evenly the transmittance of light over the entire VIS spectrum. They decrease the brightness of an image without changing the depth of field (DoF). They attenuate light by absorbing a part of the energy of the VIS wavelength, without influence on the color balance. ND filters are used to control the intensity of light going through an optical system to avoid overexposure, blooming on imaging sensors and prevent damages on light sensitive measuring sensors. ND filters are available unmounted in sizes 10 mm to 74 mm diameter and mounted with common thread sizes M 25.5 to M 67.

ND filters decrease the brightness of an image without changing the depth of field (DoF). They attenuate light by absorbing a part of the energy of the VIS wavelength, without influence on the color balance. The optical density (OD) is a function of the thickness of the glass. ODs are additive, achieve a higher value by adding several ODs together, than stack according filters until needed OD is reached. Filters IF 101 (OD 0.3), IF 102 (OD 0.6) and IF 103 (OD 0.9) come with broadband AR coating E.

Neutral Density (ND) Filters

Neutral Density Specifications PDF

Part Number Description Datasheet
IF-101 Optical Density OD 0.3 PDF
IF-102 Optical Density OD 0.6 PDF
IF-103 Optical Density OD 0.9 PDF
IF-106 Optical Density OD 1.8 PDF
IF-110 Optical Density OD 3.0 PDF

Order Schneider ND Filters

Fill out the form below for a Free Quote!

Quote Request- Individual PP

Quote Request

*Required Field

General Information

Sending

Requested Products

  • Your quote request cart is empty.
Top